Home Security Monitoring with biometric locks

Though that fingerprint locks, retina scanners and voice-activated locks only existed in Mission: Impossible? Actually, they’ve been a staple in high-end homes for at least 10 years, and the technology has now advanced to a state where it is dependable, well-featured and affordable enough for the average homeowner. However, home security monitoring with biometric locks is still relatively new to most homeowners- we go over 8 quick facts you should know about it here.
Biometric locks are easy to install and use
Some people assume that biometric locks are difficult to install or use. Actually, they work in exactly the same way as a conventional lock, and are installed in exactly the same way. You may want professional help with the software setup and usage; however this is generally very user-friendly and kept deliberately simply.
You can also do home security monitoring with biometric locks
Some software programs associated with biometric locks have the capability to not only manage different users, but log entries. Given that a small but significant percentage of robberies are committed by somebody known to the homeowner, this home security monitoring feature could be very useful.
Grease, dirt and sweat can affect the reading
Of course, if you have  anything on your fingers that changes the appearance of your fingerprints, it might interfere with the reading. You would simply clean your finger and try again.
Buy local, or ask plenty of questions
Many of the manuals for biometric locks are written overseas, and broken English is obviously not ideal for helping you understand an unfamiliar home security monitoring system. You can get around this by asking your sales consultant for an Australian-based brand, or simply by asking plenty of questions of the consultant to ensure you understand how to operate the lock.
False readings are highly unlikely
The chances that someone has enough points of similarity in their fingerprint to actually activate the lock without authorisation is extremely low; the chance that someone has those points AND wants to enter your house illegally is even lower!
Biometric locks need backup
Given the fact that biometric locks need electricity to work, they should have both battery backup and emergency key access available. Like your home security monitored alarm, you should get a model with inbuilt battery backup. In the case of an extended power outage, you can also get models with key backup. The keyed lock would only open the door if there were no power to the unit, however.

Though that fingerprint locks, retina scanners and voice-activated locks only existed in Mission: Impossible? Actually, they’ve been a staple in high-end homes for at least 10 years, and the technology has now advanced to a state where it is dependable, well-featured and affordable enough for the average homeowner. However, home security monitoring with biometric locks is still relatively new to most homeowners- we go over 8 quick facts you should know about it here.
Biometric locks are easy to install and use

Some people assume that biometric locks are difficult to install or use. Actually, they work in exactly the same way as a conventional lock, and are installed in exactly the same way. You may want professional help with the software setup and usage; however this is generally very user-friendly and kept deliberately simply.
You can also do home security alarm monitoring with biometric locks

Some software programs associated with biometric locks have the capability to not only manage different users, but log entries. Given that a small but significant percentage of robberies are committed by somebody known to the homeowner, this home security monitoring feature could be very useful.
Grease, dirt and sweat can affect the reading

Of course, if you have  anything on your fingers that changes the appearance of your fingerprints, it might interfere with the reading. You would simply clean your finger and try again.

Buy local, or ask plenty of questions

Many of the manuals for biometric locks are written overseas, and broken English is obviously not ideal for helping you understand an unfamiliar home alarm security monitoring system. You can get around this by asking your sales consultant for an Australian-based brand, or simply by asking plenty of questions of the consultant to ensure you understand how to operate the lock.

False readings are highly unlikely

The chances that someone has enough points of similarity in their fingerprint to actually activate the lock without authorisation is extremely low; the chance that someone has those points AND wants to enter your house illegally is even lower!

Biometric locks need backup

Given the fact that biometric locks need electricity to work, they should have both battery backup and emergency key access available. Like your home security monitored alarm, you should get a model with inbuilt battery backup. In the case of an extended power outage, you can also get models with key backup. The keyed lock would only open the door if there were no power to the unit, however.

Top 10 Tips for Combining DVRs and Home Alarm Security Systems

Digital Video Recorders (DVRs) are slowly becoming more and more popular. After all, if your home alarm security system was triggered and the attempted burglar got away, wouldn’t you want to know exactly who was responsible? Wouldn’t you want to be able to have the best chance of arresting them and getting them off the streets, even if your home was still safe? A lot of people would, and DVRs are the solution to the dilemma of having your house safe, but still feeling that there is somebody out there waiting to break in.   Here are our top 10 expert tips for using Digital Video Recording as a home alarm security system.

1. Leave the overwrite feature on
One of the prime reasons that DVR home alarm security systems don’t record a break-in when it occurs is that the disk was full, the overwrite feature was turned off and nobody reviewed the footage and changed the disk. The easiest way to ensure that your DVR can act as an effective home alarm security system is to simply leave the overwrite feature on.

2. Make sure you understand your system
Your security consultant will be delighted to explain how to use the DVR home alarm security system properly. Take notes while you’re talking to the installer, and don’t forget to ring up later if you think of a new question. Having a home alarm security system you don’t understand could well make it useless.

3. Set up motion detection and have your DVR monitored
A back-to-base home alarm security system monitoring company can track signals from a DVR as well as standard alarm sensors. If you don’t enable this capability, it’s like forcing your alarm system to walk around with one hand tied behind its back.
4.    Think carefully about the cost/quality continuum
While there are some exceptions, generally when you choose a cheaper DVR home alarm security system, you sacrifice a little recording quality. Remember, it is not much good being able to see that there’s a nondescript person, possibly male, breaking into your house. High-res video home alarm security systems are always preferable.

5. Consider getting an audio-equipped model
Did you know that each of our voices is completely unique? Our voice pattern is like our fingerprint – no two peoples are exactly the same. If your concern is making sure that criminals get prosecuted, audio recordings from your home alarm security system could provide you with indisputable evidence of a particular person’s guilt.

6. Be password smart
Use a difficult-to-hack password on your DVR system to prevent remote high tech hacking, or even on-site tampering. Use a combination of letters, numbers, and non-alphanumeric characters, and make it longer than 8 characters. Change your password often, just as you would for internet banking, etc.

7. Use a UPS
Uninterrupted power supplies help ensure that power surges and outages don’t allow loss of footage from your DVR. You can get these from computer shops, or ask your home alarm security system installer.

8. Keep it clean
Dirty lenses and bug-covered DVRs don’t tend to create nice clear images, worthy of making an arrest! When you change your smoke alarm battery at the changeover of standard time and daylight savings, make it a habit to clean your DVR home alarm security system lenses as well.

Home alarm security systems linked to a Digital Video Recorder really complete the picture to keep your home safe. Without the ability to find out who’s trying to break into your house, you’re leaving a crim on the streets to either return … or attack someone’s else’s house.

Honeywell Alarm Security Systems

Even if you’ve never had an alarm security system in your life, you have probably heard of Honeywell Security Products. At Pacific Security Technology, Honeywell alarm security systems and the accessories that go along with them are some of our biggest sellers. Today we are looking at the alarm-based components of the Honeywell range, and what’s helped the company become one of Pacific Security Technology’s most popular brands.
Honeywell alarm security system control panels
Honeywell make both wireless and wired control panels, but they only have a single model of wireless system, along with three different models of wired control panel. Their Lynx wireless control panel combines the functionality of:
control panel, keypad, siren, dialer, two-way voice system, and speakerphone.
This alarm security system also has some neat optional extras, like a family message centre (throw away the post-it notes!), a quick-exit feature that lets you leave the house for a short time without doing a full arm and disarm, and alarm and reminder announcements.
The three Honeywell wired systems have some pretty neat features as well – there are flexible function keys that allow for one-touch arming, the ability to control the system from any touchtone phone, a graphic display of event logs and the exit countdown, and the ability to program alarm security system arming and disarming.
Door and window contact transmitters
These are a very useful addition to alarm security systems, and Honeywell has quite a wide range. We find that the recessed mini transmitters are wonderful because they simply aren’t visible … the only people that will know it is there are your family members. Honeywell’s other standard non-recessed transmitters are ultra-slim and very unobtrusive. Many customers choose the wall transmitter which has arm/disarm functions as well as light and garage door controls on its panel.

Motion sensors
Your alarm security system control panel will be pretty useless without a motion sensor! Honeywell has a few basic motion sensors, with features like:
• The ability to surface, flush, or corner-mount the unit – whatever suits your home best
• Completely silent relay – if you’ve ever been annoyed by the clicks that other systems can make, you’ll appreciate this feature!
• The ability to temperature-compensate – the sensor would actually only activate within a certain range above or below body temperature to minimise false alarms
• Heat/cold  tolerance
Keypads
Honeywell have really leaped ahead of other companies into the 21st century with their range of keypads – you can choose from keypads that are:
• Wireless (so you can carry them round the house with you)
• Graphics-based and have menu driven prompts – these are really easy to use!
• Voice-based – the control panel will speak to you
Honeywell’s products used trusted technology, and focus on user-friendliness. Pacific Security Technology can help show you how they’ll protect your home – grab a free alarm security system consultation today!

                                             
See Clear View High Definition With 8MP Cameras